Parker ACR2000, Hardware Manual

Page: 32 / 53

ACR2000 Hardware Manual
P/N PM08117
22
ACR2000 MOTHERBOARD HARDWARE WIRING
Digital I/O Power (PWR1)
PWR1 is the connection for the user supplied voltage for the Digital Inputs and Digital
Outputs and should be wired to VEXT as shown in the table below. Refer to Figure 1 for
connector location.
Isolated voltage (VEXT) refers to +24VDC.
Note: PWR1 is a 4-pin male Weidmuller plug.
PWR1
Isolated Power Connector
Usage Pin
Isolated Common (GEXT) 1
Isolated Common (GEXT) 2
+24VDC Isolated Voltage (VEXT) 3
+24VDC Isolated Voltage (VEXT) 4
Table 1.13 ACR2000 Isolated Power Connector
Isolated Power Fuse
Fuse Circuit Amps Littelfuse Part No.
F1 VEXT 2 154.002
Table 1.14 ACR2000 Isolated Power Fuses