Parker ACR2000, Hardware Manual

Page: 31 / 53

Chapter 1, ACR2000 Motherboard Hardware Set-Up 21
ACR2000 MOTHERBOARD HARDWARE WIRING
Digital Inputs / Outputs (P3)
There is one 34 pin header provided on the ACR2000 for digital I/O interface. The 34
pin header is used for both the 16 Digital Inputs and 16 Digital Outputs. Refer to Figure
1 for connector location.
Note: P3 is a 34-pin shrouded male header.
P3
Usage Pin Usage Pin
INP-00 1 INP-01 2
INP-02 3 INP-03 4
INP-04 5 INP-05 6
INP-06 7 INP-07 8
INP-08 9 INP-09 10
INP-10 11 INP-11 12
INP-12 13 INP-13 14
INP-14 15 INP-15 16
N/C 17 OUT-32 18
OUT-33 19 OUT-34 20
OUT-35 21 OUT-36 22
OUT-37 23 OUT-38 24
OUT-39 25 OUT-40 26
OUT-41 27 OUT-42 28
OUT-43 29 OUT-44 30
OUT-45 31 OUT-46 32
OUT-47 33 N/C 34
Table 1.12 ACR2000 Digital I/O Connector