10
DeviceNet Communications Interface
Configuring the DeviceNet System
To configure the DeviceNet system, complete the steps below:
Step 1: Configuring the DeviceNet Option using DSE
Step 1.1: Inserting a DeviceNet Function Block
Display your configuration page. Click on the Block menu at the top of the screen.
1.
Move the cursor down to select "890 Comms" and select "DeviceNet".
2.
Click to select the DeviceNet block. Move this to where you want on the screen then click
again to place the block.
Figure 8. Configuration showing DNET function block
Summary of Contents for 8903/DN
Page 6: ......
