Bulletin TI-N2-1100K
Installation, Operation and Maintenance Manual
Quick Start Summary
Parker Balston Model HPN2-1100, UHPN2-1100
www.balstonlabgasgenerators.com
15
1-800-343-4048
High oxygen content in outlet nitrogen
Symptom
Course of Action
Check inlet pressure and outlet flow rate. Verify that flow demand is equal to or
less than flow capacity.
Check fittings between system and point of use for leaks.
Check flow rate at system outlet.
Check fittings between system and point of use for leaks.
Replace hydrocarbon catalyst module.
Check inlet air pressure.
Check system for leaks.
Check flow rate at system outlet. Verify that flow demand is equal to or less than
flow capacity.
Replace final filter.
Check flow rate at system outlet. Verify that flow demand is equal to or less than
flow capacity.
Check system for leaks. Call Factory (1-800-343-4048).
Replace indicating oxygen trap.
Check power supply.
Check inlet pressure.
Check particulate filter downstream from the hydrocarbon module. If it is cor
-
roded, consult the factory.
Troubleshooting
High hydrocarbon content of outlet
nitrogen (Model UHPN2-1100 only)
Low pressure at nitrogen outlet
Don’t Forget To:
Serial Numbers
No outlet flow/pressure
Indicating oxygen trap turns brown
rapidly
Nitrogen is nontoxic and largely inert. It can act as a simple asphyxiant by displacing oxy-
gen in air. Inhalation of nitrogen in excessive concentrations can result in unconsciousness
without any warning symptoms such as dizziness, fatigue, etc.
Cautions
WARRANTY (NORTH AMERICA ONLY)
(FOR INFORMATION CONTACT YOUR LOCAL REPRESENTATIVE)
Parker Hannifin guarantees to the original purchaser of this product, that if the product fails or is defective
within 12 months from the date of purchase, when this product is operated and maintained according to the
instructions provided with the product, then Parker guarantees, at Parker’s option, to replace the product, repair
the product, or refund the original price for the product. This warranty applies only to defects in material or
workmanship and does not cover: ring and valve wear on compressors, routine maintenance recommended by
the instructions provided with this product, or filter cartridges. Any modification of the product without written
approval from Parker will result in voiding this warranty. Complete details of the warranty are available on
request. This warranty applies to units purchased and operated in North America.
1
Complete and mail or fax in your warranty registration card.
2
Keep your product certification in a safe place.
3
Call the Technical Services Department at
800-343-4048,
8 AM to 5 PM Eastern
Time (North America only) with any questions, or email at [email protected].
For other locations, please contact your local representative.
The serial number for the unit is located at the bottom corner of the side panel, opposite the
power receptacle. For your own records, and in case service is required, please record the fol-
lowing:
DATE IN SERVICE
SERIAL NO.
