Parkeon Strada Transfert Evolution 2 Operation Manual Download Page 36

Page: 36 / 50

8 - Replenishing supplies

Strada Transfert Evolution2 - Operation manual

36/50

Replenishing supplies

IMPORTANT:

For complete reliability, use the parts and supplies recommended by Parkeon

only

8.1

Ticket roll

To change the ticket roll, the terminal

must

be in service.



Open the housing door.



Lift the paper guard.



Take out the end of the paper from the printer.



Take the ticket roll and reel core out of the terminal.



Check if the new roll is flat and position the paper reel core in it.



Put the new roll and paper reel core into the terminal.



Check if the roll is turning freely in the rack support.



Insert the end of the paper in the printer guide.



Carefully feed the paper home into the printer.



Press

on the keypad (refer to "Programming interface" for the use of the

keypad).

ROLL CHANGED?

YES: TICK NO: RETURN



If the newly installed ticket roll is full, press

or the green Validate button (the

ticket counter will be reset).



If the newly installed ticket roll is not full, press

or the red Cancel button.



The printer will issue a test ticket.



Close the paper guard.



Close the housing door and lock it.



With a test token, check that the terminal is operating correctly.

Summary of Contents for Strada Transfert Evolution 2



















































Search results

Summary of Contents for Strada Transfert Evolution 2

Reviews:

Related manuals for Strada Transfert Evolution 2

Brands by name

Popular brands

Parkeon Strada Transfert Evolution 2, Operation Manual

Search results

Summary of Contents for Strada Transfert Evolution 2

Reviews:

Related manuals for Strada Transfert Evolution 2

Brands by name

Popular brands