PARAMOUNT BED PK-728, Instruction Manual

Page: 21 / 32

Hook
20
②
Open the hooks at the tip when using the IV Pole.
●
The load capacity of each hook is 1kg.
●
When using the IV Pole, do not put a hand or arm between the base
or transfer board and the IV Pole. The body part may get caught,
resulting in injury.
●
The load capacity of each hook is 1kg. Do not hang an article exceeding
the load capacity because it may damage the hook, resulting in injury.
After inserting an oxygen cylinder into the oxygen cylinder holder,
tighten the thumb screw knobs properly. Otherwise, the oxygen
cylinder may move unexpectedly or drop, resulting in an injury or
damage.
●
Do not adjust the sliding pipe length while articles are hanging on the
hooks. When the thumb screw knob (for locking the sliding pipe) is
loosened, the sliding pipe may unintentionally fall, resulting in injury.
●
Before use, make sure the thumb screw knob (for locking the sliding
pipe) is firmly tightened. The sliding pipe may unintentionally fall,
resulting in injury.
To store
①
Close the hooks and adjust the sliding pipe to the shortest
length.
②
Align the thumb screw knob (for locking the sliding pipe) of
the IV Pole with the groove on the IV Pole storage holder or
tray and store away the IV Pole.
●
When not using an IV Pole, close the hooks, adjust the IV Pole to
the shortest length, and store the IV Pole in the IV Pole storage
holder in the lower part of the back section base or in the IV Pole
storage space on the tray. If not stored properly, the IV Pole could
hit other parts when the height of the stretcher is adjusted, causing
damage or deformation of the IV Pole or stretcher.
Back section base
Align the thumb screw knob (for locking the sliding pipe)
with the groove on the holder and store away the IV Pole.
Hooks (folded when stored)
IV Pole (PC-5125)
IV Pole storage holder
*Can be stored here when it is not in use
IV Pole attachment hole
Thumb screw knob
(for locking IV Pole)
Hooks
*An IV Pole can be stored
in the tray