PARAMOUNT BED PK-728, Instruction Manual

Page: 20 / 32

19
8. IV Pole (PC-5125)
■
IV Pole attachment holes are located in two places each on the left and right sides of the stretcher,
four places in total, to attach an IV Pole for intravenous drip.
●
For an IV Pole to be directly
mounted on the stretcher, use only
accessories approved by Paramount
Bed. The use of products other than
the specified suitable products or
products from other companies
could create unintended gaps,
cause interference between
products, or lower stability,
resulting in injury or damage to
the stretcher.
■
When not using an IV Pole, you can store it either in the IV Pole storage holder or tray.
To attach
①
Insert an IV Pole firmly all the way into an IV Pole
attachment hole.
②
Firmly lock the IV Pole by turning the thumb screw knob
(for locking an IV Pole).
●
Insert an IV Pole firmly all the way
at a specified attachment position
and firmly tighten the thumb screw
knob (for locking an IV Pole). If an
IV Pole is used in an insufficiently
inserted or locked state, it may
unintentionally fall or become
detached, resulting in injury.
Furthermore, when the backrest is
lowered, the IV Pole may come into
contact with it, resulting in damage
to the IV Pole.
To use
①
Loosen the thumb screw knob (for locking the sliding pipe)
of the IV Pole, adjust the sliding pipe length, and then lock
the sliding pipe by tightening the loosened thumb screw knob.
●
When loosening the thumb screw
knob, firmly grip the sliding pipe
(upper part of the support pole).
The sliding pipe may
unintentionally fall, resulting in
injury.
●
Adjust the sliding pipe length to
within 400 mm. Pulling the
sliding pipe out too far could
cause it to come off, resulting
in injury or damage.
IV Pole (PC-5125)