Paramotor PXP Meter, Manual, Page: 9 / 118

Installation of the Switchboard
The installation of the Switchboard is very simple.
We will supply as standard: 6 screw clamps with plastic protection 12mm / 14mm / 16mm
x 2 of each (other sizes on request), 2 screws of 6mm x 20mm and 2 velcro battery
fasteners.
With these clamps and the threads installed in the Control Unit, we will be able to install our
Control Unit in any position we wish.
Let's give a practical example of mounting on a Paramotor.
Depending on whether we need to disassemble the Paramotor chassis we can choose one
place or another, however we recommend installing it in a fixed place (away from the fuel
tank inlet or the engine exhaust = heat) and that does not affect the assembly or disassembly
of the Paramotor chassis and so we have our Control Unit always fixed, much better.
screws
and threads Switchboard
NOT about input fuel NOT by engine exhaust
9