Paramotor PXP Meter, Manual, Page: 14 / 118

4 - Installation "CHT Sensor" (2 Pins - Green)
It is very easy to unscrew the spark plug, insert the round of the sensor and screw the spark
plug back in, very easy.
As standard we will supply the round of the sensor in 14 mm but we have measures of 10 /
12 mm.
1 - Remove spark plug + get
round Sensor
3 - Completed 2 - Tighten spark plug
Note: we will take into account that the cable that comes out of the round of the
Sensor does not touch much with the aluminum of the cylinder head, it can burn
and break the Sensor with the vibrations, we leave the most centered and clean as
possible.
14