Important Regulatory Information
C
Issue 2 May 1995
5. A rare phenomenon can create a voltage potential between the
earth grounds of two or more buildings. If products installed in
separate buildings are interconnected, the voltage potential may
cause a hazardous condition. Consult a qualified electrical
consultant to determine whether or not this phenomenon exists
and, if necessary, implement corrective action prior to
interconnecting the products.
In addition, if the equipment is to be used with telecommunications
circuits, take the following precautions:
–
Never install telephone wiring during a lightning storm.
–
Never install telephone jacks in wet locations unless the
jack is specifically designed for wet locations.
–
Never touch uninsulated telephone wires or terminals
unless the telephone line has been disconnected at the
network interface.
–
Use caution when installing or modifying telephone lines.
–
Avoid using a telephone (other than a cordless type)
during an electrical storm. There may be a remote risk of
electric shock from lightning.
–
Do not use the telephone to report a gas leak in the
vicinity of the leak.
Government Requirements and
Equipment Return
Certain governments require that instructions pertaining to modem
connection to the public switched telephone network be included in the
installation and operation manual. Specific instructions are listed in the
following sections.
Notice to Users of the Public Switched Telephone Network
1. This equipment complies with Part 68 of the FCC rules. On the
equipment is a label that contains, among other information, the
FCC registration number and ringer equivalence number (REN) for
this equipment. If requested, this information must be provided to
the telephone company.
2. The Universal Service Order Code (USOC) associated with the
services the equipment is to be connected is RJ11C.