IN-1
Issue 2 May 1995
Index
A
AutoSync.
See Hayes AutoSync
Active User Profile, 3-10
AT Commands.
guidelines for use, 3-3
+++ (escape sequence), 3-9,
4-2
A/ (repeat last command), 4-2
A (answer), 4-2
B (CCITT/Bell Mode), 4-2, E-2
C (automatic cellular setup), D-3
D (dial), 3-5, 4-3
E (command character echo),
4-4
H (hook), 3-8, 4-4
I (modem identification), 4-4
M (speaker on/off), 4-4
O (return to online data mode),
4-4
P (pulse dial), 4-4
Q (response codes), 4-5, C-1
S (change S-Register), 4-5
Sn? (view S-register), 4-5
T (tone dial), 4-5
V (response codes format), 4-5,
C-1
X (ext. response codes, dial
tone detect, busy tone
detect), 4-6, C-1
Z (reset and load stored profile),
3-13, 4-7
\A (maximum frame size), 4-8
\C (auto-reliable buffering), 4-8
\G (modem-to-modem flow
control), 4-9
\K (break control), 4-9
\N (error control mode), 4-10
\Q (serial port flow control),
3-15, 4-11
\T (inactivity timer), 4-11
\X (XON/XOFF passthrough
flow control), 4-11
&C (CD control), 4-12
&D (DTR control), 3-8, 4-12
&F (load factory settings), 3-12,
4-12
&G (guard tone), 4-13
&I (transmit level), 4-13
&M (select async or autosync
mode), 3-16, 4-13
&P (dial pulse ratio), 4-14
&Q (same as &M), 4-14
&S (DSR control), 4-14
&T (tests), 4-14, A-6, A-7
&V (view active and user
profiles), 3-11, 3-13, 4-16
&W (write/save changes to
memory), 3-11, 4-16
&Y (load a user profile on
power-up), 3-10, 4-16
&Z (store telephone number),
3-7, 4-3, 4-17
%A (error control fallback
character), 4-17
%B (max. data rate and
modulation), 4-18
%C (V.42/MNP 5 data
compression), 4-19
)C (cellular telephone selection),
4-19
auto-answer ring number (S0),
4-20
auto-reliable buffering (\C), 4-8
automode control (S78), 4-23
autorate control (S76), 4-23
