Using Your Modem
3-13
Issue 2 May 1995
Reload Settings from a User Profile (&Y)
Use the &Y command to select whether the contents of either
User Profile 0 or User Profile 1 are loaded into Active memory
each time the modem turns on or when a reset command (Z) is
issued.
To use the &Y command:
TYPE:
AT&Y
n
where
n is 0 for User Profile 0, or 1 for User
Profile 1.
PRESS: Enter
Reset Modem and Load User Profile (Z)
Use the Z command to reset the modem and load the contents
of User Profile 0 or User Profile 1 into the the modem’s Active
memory area.
To use the Z command:
TYPE:
ATZ
n
where
n is 0 for User Profile 0, or 1 for User
Profile 1.
PRESS: Enter
The Z command must be the last command in the command
string, because any commands after it will be ignored.