A. Configuration Options
A-12
February 2001
8784-A2-GB20-30
General SNMP Management Options
To access the General SNMP Management Options screen, follow this menu
selection sequence:
Main Menu
→
Configuration
→
Current Configuration
→
Management and Communication
→
General SNMP Management
Disconnect Time (Minutes)
Possible Settings: 1 – 60
Default Setting: 5
Number of minutes of inactivity before a Telnet session terminates automatically. Timeout
is based on no keyboard activity.
Disconnect Time (minutes) appears when Inactivity Timeout is enabled. It does not
appear when the unit is connected to a DSLAM card running in IP Conservative
mode.
1 – 60 – The Telnet session is closed after the selected number of minutes.
Table A-5.
Telnet Session Options (2 of 2)
main/config/management/SNMP Hotwire
Slot: 4 Model: 8784
GENERAL SNMP MANAGEMENT OPTIONS
SNMP Management: Enable
Community Name 1: Public
Name 1 Access: Read/Write
Community Name 2: Public
Name 2 Access: Read/Write
-------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Save
Summary of Contents for Hotwire 8784
