Paradyne Hotwire 8784, User Manual

Page: 66 / 110

6. Messages and Troubleshooting
6-4
February 2001 8784-A2-GB20-30
Limit of six Login IDs
reached An attempt to enter a new
login ID was made, and the
limit of six login/password
combinations has been
reached. 1. Delete another
login/password combination.
2. Re-enter the new login ID.
No Security Records to
Delete Delete was selected from the
Administer Login screen, and
no security records had been
defined.
„
No action is needed.
„
Enter a security record.
Password Matching
Error – Re-enter
Password Password entered in the
Re-enter Password field of
the Administer Logins screen
does not match what was
entered in the Password
field.
„
Try again.
„
Contact your system
administrator to verify your
password.
Please Wait Command takes longer than
5 seconds. Wait until message clears.
Test Active A test is running and no
higher priority health and
status messages exist.
„
Contact service provider if
test initiated by the network.
„
Wait until the other test ends
and message clears.
„
Cancel all tests from the Test
screen.
„
Stop the test from the same
screen the test was started
from.
0.0.0.0 is an invalid
IP address An IP address of all zeros
was entered. Enter a valid, non-zero IP
address.
Table 6-1. Device Messages (2 of 2)
Device Message What Message Indicates What To Do