Paradyne Hotwire 8784, User Manual

Page: 106 / 110

Index
IN-2
February 2001 8784-A2-GB20-30
D
deleting a Login ID, 7-3
Destination, SNMP traps, A-17
Device
and test monitoring, 1-2
Failed
self-test result, 4-5
status message, 4-3
messages, 6-3
Name, 3-2
Tests, 5-8
diagnostics, 1-2
dimensions, D-1
Disconnect Time, for Telnet session, A-12
Display LEDs, 4-13
documents, related, vi
DOS TFTP server on, 3-6
Download Failed, status message, 4-3
downloading a configuration, 3-6
DSL
Failed, self-test result, 4-5
Line Rate, A-3
Mode, A-9
Port LEDs, 4-14
DSLAM
exiting from session, 2-9
login, 2-2
management serial port, 1-2
DSX-1
Failed self-test results, 4-5
Interface Options, A-4
LEDs, 4-14
Performance Statistics, 4-11
Send All Ones on Failure, A-6
DTE
connector pin assignments, C-1
Loopback, 5-5
E
EER (Excessive Error Rate) status message, 4-3
effective access level, 7-1
Embedded Operations Channel (EOC), 1-2
ending
an ATI session, 2-9
tests, 5-9
Enterprise Specific Traps, A-18, B-3
environment requirements, D-1
Equalization, Line, A-5
Error
messages (line 24), 6-3
Rate Threshold, A-5
Statistics, 4-6
Excessive Error Rate (EER) Threshold, A-2, A-5
F
factory defaults, 3-3–3-4
Failure, self-test result, 4-5
features, 1-2
Framing, A-5
function keys, 2-7
and message area, 2-5
G
General
SNMP Management
assigning access, 7-4
Options, A-12
Traps sent, A-17
H
Health and Status messages, 4-3
I
Identity, 3-2
IMC, defined, 1-2
Inactivity Timeout, Telnet session, A-11
intended audience, v
IP address
DSL peer, A-3
example, 8-2
NMS, A-15, A-17
selecting, 8-1
SNMP manager, 7-4
IP Conservative, IP addressing depends upon, 8-1
IP Validation, NMS security, A-15
K
keys
function, 2-7
keyboard, 2-6
L
lamp test, 5-8
active, test status, 4-5
LEDs, 4-13
Display, 4-13
lamp test, 5-8
viewing via the ATI, 4-13
Line
Coding format, A-5
Equalization, A-5
Framing, A-5
Loopback (LLB), 5-3
Remote Telco Loopback, enabling/disabling, A-9