Paradyne Hotwire 8784, User Manual

Page: 76 / 110

A. Configuration Options
A-2
February 2001 8784-A2-GB20-30
Network Interface Options
For Network Interface Options, refer to Table A-1, Network Interface Options .
To access the Network Interface Options screen, follow this menu selection
sequence:
Main Menu
→
Configuration
→
Current Configuration
→
Network
Table A-1. Network Interface Options (1 of 2)
Margin Threshold
Possible Settings: –5db, –4db, –3db, –2db, –1db, 0db, 1db, 2db, 3db, 4db, 5db,
6db, 7db, 8db, 9db, 10db
Default Setting: 0db
Determines the level, expressed in decibels, at which a signal-to-noise margin condition is
recognized.
–5db to 10db – Sets the margin threshold to this value.
Excessive Error Rate Threshold
Possible Settings: 1E–4, 1E–5, 1E–6, 1E–7, 1E–8, 1E–9
Default Setting: 1E–6
Determines the error rate at which an excessive error rate (EER) condition is recognized.
The rate is the ratio of the number of CRC errors to the number of bits received in a
certain period.
1E–4 to 1E–9 – Sets the error rate threshold to this value.
main/config/network Hotwire
Slot 4 Model: 8784
Port 2
NETWORK INTERFACE OPTIONS
Margin Threshold: –3db
Excessive Error Rate Threshold: 1E–6
AutoRate: Disable
DSL Line Rate: 1552 Kbps
Peer IP Address: 111.255.255.000 Clear
Circuit Identifier: Clear
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Save