Paradyne Hotwire 8779, User Manual

Page: 143 / 182

B. Standards Compliance for SNMP Traps
8700-A2-GB20-40 May 2002
B-5
enterpriseFallback
AutoRate(13) After a loss of signal, the
unit resynchronized to a
lower rate than the last
known rate.
Variable bindings:
„
ifIndex (RFC 2863)
„
ifAdminStatus
(RFC 2863)
„
ifOperStatus (RFC 2863)
„
ifType (RFC 2863)
Variable line conditions.
enterprisePrimaryClockFail
Clear(101) The LTU has recovered and
is using its primary clock
source.
No variable bindings.
enterpriseSecondaryClock
FailClear(104) The LTU has recovered and
is using its secondary clock
source.
No variable bindings.
enterpriseTestStop(105) All tests have been halted.
Variable bindings:
„
ifIndex (RFC 2863)
„
ifAdminStatus
(RFC 2863)
„
ifOperStatus (RFC 2863)
„
ifType (RFC 2863)
„
ifTestType (RFC 2863)
All tests on an interface have
been stopped by timeout or
an Abort All Tests command.
enterpriseFallback
AutoRateClear(113) After an AutoRate fallback
condition, the unit
resynchronized to the last
known rate.
Variable bindings:
„
ifIndex (RFC 2863)
„
ifAdminStatus
(RFC 2863)
„
ifOperStatus (RFC 2863)
„
ifType (RFC 2863)
SNMP Trap Description Possible Cause