A. Configuration Options
A-28
May 2002
8700-A2-GB20-40
Management and Communication Options Menu
The Management and Communication Menu allows you to access the following:
Telnet Session Options (
Table A-12
)
General SNMP Management Options (
Table A-13
)
SNMP NMS Security Options (
Table A-14
)
SNMP Traps Options (
Table A-15
)
Inband Management Channel Options – Model 8779 (
Table A-16
)
Telnet Session Options
The Telnet Session configuration options control whether a Telnet session is
allowed through an interconnected IP Network. If allowed, these options determine
what level of security to apply to the session to control access. Only one Telnet
session is allowed at a time. Initial values are determined by the configuration you
currently have loaded.
NOTE:
Telnet Session is only available for IP Complex systems.
To access the Telnet Sessions Options screen, follow this menu selection
sequence:
Main Menu
→
Configuration
→
Current Configuration
→
Management and Communication
→
Telnet Session
main/config/management/telnet
Slot: 18 Model: 87xx
TELNET SESSION OPTIONS
Telnet Session: Enable
Telnet Login Required: Enable
Session Access Level: Administrator
Inactivity Timeout: Enable
Disconnect Time (Minutes) 5
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Save
Summary of Contents for Hotwire 8779
