6. Security
8700-A2-GB20-40
May 2002
6-3
Creating a Login
Logins apply to Telnet access directly to the ATI of the Hotwire Termination Unit.
The Administer Logins menu option is not presented when you access the unit
through the management card of the DSLAM and when in IP Conservative mode.
Six login ID/password combinations are available. Each Login ID and Password
must be unique and include an access level.
Procedure
1. To create a login record, follow this menu selection sequence:
Main Menu
→
Control
→
Administer Logins
2. Select New and press Enter. The Login Entry screen is displayed.
main/control/admin_logins
Slot: 4
Model: 87xx
ADMINISTER LOGINS Page 1 of 1
Login ID: newuser
Access Level: Administrator
Are You Sure? Yes
--------------------------------------------------------------------------------
ESC for previous menu MainMenu Exit
Save PgUp PgDn New Delete
main/control/admin_logins
Slot: 4
Model: 87xx
LOGIN ENTRY
Login ID: newuser
Password: e34t136
Re-enter Password: e34t136
Access Level: Administrator
WARNING
New logins will not become permanent until saved
through the “ADMINISTER LOGINS” screen!
--------------------------------------------------------------------------------
Ctrl-a to access these functions ESC for previous menu MainMenu Exit
Save PgUp PgDn New Delete
Summary of Contents for Hotwire 8779
