Paradyne HOTWIRE 7900, User Manual

Page: 33 / 84

MTU-M Status and Performance Functions
5-5
7900-A2-GB20-00 March 1998
Status Function
Network input signal Indicates the status of the network input signal.
H
In service
H
Out of service
H
N/A
DTR Signal
(V.35 CP units only) Indicates the Data Terminal is ready to transmit and receive
data.
DSR Signal
(V.35 CP units only) Indicates the Data Set is ready to transmit and receive data.
S/N Ratio Loop A Displays the signal-to-noise ratio of Loop A.
S/N Ratio Loop B
(HDSL only) Displays the signal-to-noise ratio of Loop B.
Press Enter to view the remaining status of the termination unit.
Menu path: Main
→
Status
→
(2-80) (Screen 2 of 2)
Status of xDSL Circuit #3
__________________________ xTU–C______________ xTU-R_____
Card type xDSL E1/G703 xDSL E1/V.35
Loop Mode Loops A & B Loops A & B
Loopback OFF OFF
Line encoding B8ZS B8ZS
Line build out 0 to 133 feet 0 to 133 feet
Frame type D4
Starting time slot 1
V.35 Payload Rate 1984 Kbps (31x64)
V.35 Transmit Timing Loop
DSP software revision 1.17 1.17
DSL software revision 6.0 7.0
DSL software checksum 737e 837e
card serial # 87464 85565
Hit Return to continue ...