Paradyne HOTWIRE 7900, User Manual

Page: 42 / 84

MTU-M Maintenance Functions
6-4
7900-A2-GB20-00 March 1998
Changing MTU-M Operational Parameters (sysconfig)
The sysconfig option on the Maintenance menu is used to display and change
several parameters that affect MTU-M operation. Type sys at the maint –>
prompt, to display the Operating Parameters screen (values displayed depend on
your current configuration):
NOTE:
If in the course of making changes you want to start over with the current
settings, use the read option. This resets the operations parameters back to
their current values.
Changes to MTU-M operational parameters do not take effect until you Quit the
MTU-M Operations Parameters menu and save your changes.
Menu path: Main
→
Maintenance
→
sysconfig
MTU–M Operations Parameters
EEPROM values are: VALID
Polling Range: 2 – 16
Polling interval: 10 seconds
Poll time-out on 256th’s second 30
Initial alarm on/off setting: ON
Initial menu on/off setting: ON
Console port baud rate: 9600 baud
Hit return to continue
...
Would you like to modify values? [Y/N]:: Y
You must enter password to modify values: ***
The following values have been copied to a work buffer and
individual changes will be made to the variables in the work buffer.
When finished with changes, enter <quit>
and you will be asked if you want the changes saved.
Hit return to continue
...