8
Installing the Hotwire 5546 RTU
Place the Hotwire 5546 RTU on a flat surface with clearance for the rear connectors.
Procedure
1. Use the RJ11 6-pin cable for the DSL connection. Insert one end of the cable into
the jack labeled DSL. Insert the other end into the wall jack labeled DSL.
98-15612-01
DSL
Jack
POWER
CONSOLE
DSL
Hotwire 5546 RTU
DTE
If the Hotwire 5546 RTU is installed on the same line as POTS, a Hotwire 5038
Distributed POTS Splitter can be used as a filter. One 5038 Distributed POTS
splitter is installed as a filter for each telephone as shown below. To install the
5038 Distributed POTS splitter, refer to
Hotwire 5038 Distributed POTS Splitter
Customer Premises Installation Instructions.
98-15813
Distributed
POTS Splitter
Line from
RJ11 Wall Jack
PHONE
LINE
DSL
PHONE
LINE
DSL
PHONE
LINE
DSL
Line from
RJ11 Wall Jack
Distributed
POTS Splitter
Distributed
POTS Splitter
Customer
Premises (CP)
Hotwire
RTU
