9
2. The DTE port connection is configurable for EIA-530A or V.35 operation.
Insert the 25-position EIA-530A DTE cable or V.35 adapter cable into the jack
labeled DTE. Tighten both screws on the DTE connector. Insert the other end into
the DTE.
98-15616-01
POWER
DSL
Hotwire 5546 RTU
DTE
CONSOLE
To
DTE
V.35 Adapter
Cable
NOTE:
Use only well-shielded cables, including a braided metal shield and metallic hood.
3. The Console port connection is optional and only necessary to change the DTE
configuration defaults or to download software. This connection can be temporary
and disconnected after the changes are completed. See
Hotwire 5546 RTU
Configuration Setup, page 12.
The Console port acts as a DCE and uses an 8-pin RJ45 straight-through cable for
the connection to a VT100 terminal or a PC running a terminal emulation program.
Use the supplied DB9 adapter to connect to a PC or laptop.
Insert the 8-pin end of the cable into the jack labeled CONSOLE. Insert the other
end into the DB9 adapter for the serial port of the VT100 terminal or PC.
98-15615-01
Console
Serial Line
POWER
CONSOLE
DSL
Hotwire 5546 RTU
DTE
VT100 Terminal
or PC
(9-pin Adapter)
