12
Hotwire 5546 RTU Configuration Setup
The Console cable is connected to a VT100-compatible terminal or a PC running a
terminal emulation program. Verify the terminal settings:
Data rate set to 9.6 kbps
Character length set to 8
Parity set to None
Stop bits set to 1
Flow control is Off
When the Console cable is connected, the DTE Configuration screen appears with the
following default settings:
DTE Configuration:
Electrical Interface
V35
Local Loopback
OFF
TX Timing Source
DCE
TX Data Strobe
POSITIVE
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
HW Model:
X
Serial No.:
X
HW Revision: X
FW Version:
X
If
the DTE Configuration screen does not appear, press Ctrl-l. Use the following
keyboard keys to navigate within the screen:
To . . .
Press . . .
Move to the next field
Tab key or Down Arrow key.
Move to the previous field
Ctrl-k or Up Arrow key.
Toggle between the two valid settings
Spacebar.
Redraw the screen
Ctrl-l.
Save changes made since the last Return
Enter (Return).
