manualshive.com logo in svg

Paradyne FrameSaver SLV 9626, Installation Manual, Page: 25 / 36

Share
Download
Paradyne FrameSaver SLV 9626 Installation Manual Download Page 25

25

Connecting the Modem

Procedure

1.

Insert the 6-pin connector on the modem cable into the MDM interface. 

2.

Insert the other end of the cable into the modem service RJ11C jack.

3.

Verify modem operation.

If Port Use is set to Terminal (dial-in access):

—

Dial the modem’s phone number using a remote asynchronous terminal or PC.

—

Verify that the Main Menu appears.

If Port Use is set to Net Link (SNMP, Telnet, FTP, and trap dial-out):

—

Dial the modem’s phone number using a PC running PPP or SLIP link protocol.

—

From the PC, run an IP Ping test to the modem interface.

If your results using either method are unsuccessful, make sure both ends of the 
modem cable are properly seated and secured. Then, verify that the modem was 
configured correctly (see 

Setting Up the Modem

 on page 16). Otherwise, refer to 

the status information in the 

FrameSaver SLV Operations Guide.

Proceed to 

Connecting to ISDN

 on page 26 if the FrameSaver unit has ISDN backup 

capability.

POWER

COM

DBM

MDM

NET

99-16482

RJ11C

Jack

Summary of Contents for FrameSaver SLV 9626





































Reviews:

No comments