Paradyne FrameSaver SLV 9626, Installation Manual, Page: 18 / 36

18
Setting Up the ISDN DBM
These instructions are for units with ISDN backup capability. The ISDN BRI DBM
supports up to 2 B-channels.
The following guidelines apply:
Central site configuration guidelines:
— Set up the ISDN DBM physical interface.
— Change the Automatic Backup Configuration to Multi_Site_Backup. (A BRI
DBM is configured for Single_Site_Backup.)
— Modify the Link Profile(s) that Automatic Backup Configuration created to add a
phone number.
Remote site configuration guidelines:
— Set up the ISDN DBM physical interface.
— Modify the HQ_Site Link Profile that Automatic Backup Configuration created
to add a phone number.
— Set the criteria by which automatic backup will take place.
Setting Up the DBM Physical Interface
Procedure
1. Configure the DBM interface.
Main Menu
→
Configuration
→
ISDN
→
Physical
2. Minimally, set the following configuration options:
— Interface Status set to Enable.
— Service Profile ID1 (SPID)
— Local Phone Number 1
— Service Profile ID2 (SPID)
— Local Phone Number 2
3. Save the configuration and return to the ISDN menu.