13
Minimal Installation for Service Providers
In this set of procedures, once the unit is installed and minimal configuration is
completed using the Easy Install feature, the NOC can complete and verify the setup.
Physically Installing the Unit and Setting Up for Remote Access
It is assumed that frame relay service is turned on at the site.
Procedure
1.
Follow Steps 1 through 7 of
Full Installation and Setup
on page 10.
2.
Install the DTE cable (see
Connecting to the DTE (Router or FRAD)
on page 24).
3.
Install the modem cable (see
Connecting the Modem
on page 25).
4.
If the unit has ISDN backup capability, install the ISDN DBM cable (see
Connecting
to ISDN
on page 26).
Physical installation of the unit is complete; the NOC can now remotely access the unit
for additional configuration.
Summary of Contents for FrameSaver SLV 9626
Page 35: ...35 ...