Paradyne COMSPHERE 3920PLUS Series, Technical Reference Manual

Page: 78 / 356

5-1 3920-A2-GH30-40 October 1998
Configure Branch
Overview 5-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configure Branch 5-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Editing and Saving a Configuration Option 5-4 . . . . . . . . . . . . . . . . . . . . . . .
Configuration Tables 5-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Multiport Mode 5-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DTE Interface — Multiport Mode 5-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Line Dialer — Multiport Mode 5-19 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dial Line — Multiport Mode 5-22 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Leased Line — Multiport Mode 5-25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Test — Multiport Mode 5-30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Misc — Multiport Mode 5-31 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Singleport Mode 5-35 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DTE Interface — Singleport Mode 5-37 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DTE Dialer — Singleport Mode 5-45 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Line Dialer — Singleport Mode 5-49 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dial Line — Singleport Mode 5-53 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Leased Line — Singleport Mode 5-57 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
V.42/MNP/Buffer — Singleport Mode 5-64 . . . . . . . . . . . . . . . . . . . . . . . . . . .
Test — Singleport Mode 5-71 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Misc — Singleport Mode 5-73 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Security — Singleport Mode 5-78 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Overview
After installing a 392xPlus modem, its software configuration options must be set using the
diagnostic control panel (DCP). This chapter describes how to access and use the Configure branch
of the Top-Level menu via the DCP.
The Configure branch accesses the Edit Area which is a work space where you view and change
the configuration options. These configuration options are loaded to the Edit Area from one of five
configuration option areas: Active (Operating), Active (Saved), Customer 1, Customer 2,
or Factory.
•
Active (Operating) is a configuration area containing configuration options currently used
by the modem. When the modem is powered on or when a save is performed, the contents of
Active (Saved) are loaded into Active (Operating). Any changes made using AT commands
directly affect this configuration area.
•
Active (Saved) is a read from and write to configuration option area containing the most
recently saved changes made to any configuration options. In the event of a power cycle or
reset, the modem retrieves these settings from nonvolatile memory.
•
Customer 1 and Customer 2 are two additional read and write (changeable) configuration
areas where you can create and store additional configurations for specific applications.
5