Paradyne COMSPHERE 3920PLUS Series, Technical Reference Manual

Page: 200 / 356

Call Setup Branch
10-7 3920-A2-GH30-40 October 1998
If the modem is operating in a Dial Backup mode, the Dial Standby function forces the modem
to primary leased-lines and the LCD displays the status message Command Complete.
Once the modem is in Dial Standby mode, Return_to_Dial appears on the LCD. Selecting this
function forces the modem to backup networks and the LCD displays the status message
Command Complete.
To exit this function and remain in the Call Setup branch, press the key. To exit and return
to the Top-Level menu, press the key.
Change Directory
Change Directory allows you to enter or modify telephone numbers. The modem has nonvolatile
memory locations that allow you to store up to 24 telephone numbers. Each directory location
can accept up to 40 characters; this includes the telephone number and dial command modifiers.
Any telephone number dialed using the DCP Dial command must appear in a directory location.
NOTE
If the modem is operating on leased lines and has a dial line
attached for dial backup purposes, it is required that directory
location 1 contain the telephone number used for dial backup.
To access Change Directory from the Call Setup branch, make the following selections:
F1
Call Setup: <
Change_Directory
F2 F3
Press the key until Change_Directory appears. Press any function key to select
Change_Directory.
F1
01:551234
z
Nxt
" #
F2 F3
The phone number listed in directory location 1 appears. Select Nxt to display other directory
locations.