Paradyne COMSPHERE 3920PLUS Series, Technical Reference Manual

Page: 173 / 356

COMSPHERE 392xPlus Modems
7-12 October 1998 3920-A2-GH30-40
•
For Multiple download configurations, ensure that:
— the tributaries are responding properly to polls (this may take several minutes after the
control modem powers up). Refer to Chapter 9, Sub-Network Health and Status
Branch , for more information.
— the control modem’s active poll list contains all the network management addresses
for the remote 392xPlus tributary modems that will receive the download (refer to
Chapter 6,
Poll List Branch ).
— all 391x modems are removed from the active poll list.
Cloning a Single TMp Remote
F1
Choose DLL Type >
Single
Multiple
F2 F3
Press the F1 key to select Single Clone Remote.
F1
Choose Address:
Ent
"
xxx
F2 F3
The address field (xxx) displays the network management address of the modem that receives
the download. The valid address field range is from 001 to 256.
To increment digits within the address field (xxx), use the and keys to position the
cursor ( _ ) under the digit to be incremented. Press the F2 (
"
) key to increment the digit.
Press F1 (Ent) to select the modem that will receive the download.
F1
Choose Password:
Ent
"
yyyyyyyy
F2 F3
The password field (yyyyyyyy) displays the remote access password for the modem that will
receive the download.
To increment digits within the password field (yyyyyyyy), use the and keys to position
the cursor ( _ ) under the digit to be incremented. Press the F2 (
"
) key to increment the digit.
Press Enter (Ent) to select the modem that will receive the download.
After completing these actions, proceed to the section titled Implementing a Clone Remote
Operation .