Paradyne 9820 User Manual Download Page 251

Page: 251 / 281

Connectors, Cables, and Pin Assignments

C-5

9820-A2-GB20-20

June 2000

Procedure

To configure an external modem:

1. Disconnect the asynchronous terminal from the standard cable. See

page C-4

for an illustration of the COM Port connection.

2. Reconnect the crossover cable to the external modem.

3. Enable auto-answer on your modem, and configure it to use the following

LSD, DSR, CTS, RTS, and DTR control leads.

See the table below for AT D0 command strings. Use the following command
string:

AT &C0 &D2 &S0 &R1 \D0 S0=1

AT Command String

To configure the modem to . . .

&C0

Force LSD on.

&D2

Drop the connection when the unit drops DTR.

&S0

Force DSR on.

&R1

Ignore RTS.

\D0

Force CTS on.

S0=1

Automatically answer incoming calls.

Summary of Contents for 9820


























































































































































































































































































Search results

Summary of Contents for 9820

Reviews:

Paradyne 9820, User Manual, Page: 251 / 281

Search results

Summary of Contents for 9820

Reviews: