Paradyne 9820 User Manual Download Page 110

Page: 110 / 281

Security and Logins

5-12

9820-A2-GB20-20

June 2000

See

Configuring SNMP NMS Security

in Chapter 4,

Configuration Options, for

more information about security configuration options.

Modifying a Login

Logins are modified by deleting the incorrect login and creating a new one.

Deleting a Login

Procedure

To delete a login record:

1. Select Administer Logins.

Main Menu

→

Control

→

Administer Logins

2. Page through login pages / records using the PgUp or PgDn function keys

until the login to be deleted is displayed.

3. Select De l ete.

4. Save your deletion.

When the deletion is complete,

the number of login pages / records reflects

one less record, and the record before the deleted record reappears.

Example:
Page 2 of 4 is changed to Page 2 of 3.

Summary of Contents for 9820


























































































































































































































































































Search results

Summary of Contents for 9820

Reviews:

Paradyne 9820, User Manual, Page: 110 / 281

Search results

Summary of Contents for 9820

Reviews: