Paradyne 9820, User Manual, Page: 221 / 281

SNMP MIBs and Traps, and RMON Alarm Defaults
B-5 9820-A2-GB20-20 June 2000
NetScout Indexes to the Interface Table (ifTable)
For remote monitoring at sites where FrameSaver units are operating with
NetScout Probes, use the following ifName, ifDescr, and ifIndex.
Table B-2. NetScout Interface Objects Information
ifName Description ifDescr (ifEntry 2) ifIndex
Frame Relay Logical Layer
Frame Relay 4
Network
V.35/ X.21 Network Synchronous
Data Port For the user side:
RMON (IN/OUT); Network
Synchronous Data Port of
FR DTE, Slot: 1, Port: 2;
DP FR NAM; Hardware Version:
hhhh-hhh 4
For the network side:
RMON (IN/OUT); Network
Synchronous Data Port of
FR SERVICE, Slot: 1, Port: 2;
DP FR NAM; Hardware Version:
hhhh-hhh
RMON Logical Layer
RMON Frame
Relay Logical
Interfaces
(9820 and These values are
calculated.
H
For the DTE:
OUT – RMON (IN);
[
ifName of the interface]
17– 48
(9820 and
9820-2M)
H
For the DTE:
(ifIndex –1) * 2 +17
H
For the DCE: DTE
calculated value +1
OUT – RMON (OUT);
[
ifName of the interface]
RMON Virtual
Interfaces These values are
calculated based on
the probe’s internal
circuit index: circuit
index +65. — 65 – 512
(9820 and
9820-2M)
65 –
100000000
(9820-8M
and
9820-45M)
RMON Virtual
Logical
Interfaces
(9820 and
9820-2M) These values are
calculated.
H
For the DTE:
(virtual interface
ifIndex – 65) * 2
IN – VIRTUAL PVC
[
interface number ]
[ DLCI number ] DTE
513 –1023
9820 2M)
ifIndex – 65) * 2
+513
H
For the DCE:
DTE calculated
value +1
OUT – VIRTUAL PVC
[
interface number ]
[
DLCI number ] DCE