Paradyne 3165, Operator'S Manual

Page: 270 / 316

F. SNMP MIB Objects
F-30
March 2001 3160-A2-GB24-10
Stat–>LED–>Prtn:
DTR
CTS
RTS
Read:
rs232InSigState from rs232InSigName == dtr
rs232outSigState from rs232OutSigName == ctr
rs232InSigState from rs232InSigName == rts
Stat–>ID:
Ser
Mod
SRev
HRevCCA1
HRevCCA2
Read the sysDescr object from the System Group
Test–>Rlpbk–>LLBUP Set dsx1SendCode to dsx1SendLineCode
Test–>Rlpbk–>LLBDN Set dsx1SendCode to
dsx1SendResetCode
Test–>Rlpbk–>54UP–>Prt n Set IfExtnsTestType for port n to testSendV54Up
Test–>Rlpbk–>54DN–>Prt n Set IfExtnsTestType for port n to testSendV54Down
Test–>Rlpbk–>FT1UP–>Prt n Set IfExtnsTestType for port n to testSendFT1UP
Test–>Rlpbk–>FT1DN–>Prt
n
Set IfExtnsTestType for port
n to testSendFT1Down
Test–>Lpbk–>LLB
Test–>Lpbk–>bort–>LLB
Set dsx1LoopbackConfig for Net T1 to dsx1LineLoop
Set dsx1LoopbackConfig for Net T1 to dsx1NoLoop
Test–>Lpbk–>PLB
Test–>Lpbk–>Abort–>PLB
Set dsx1LoopbackConfig for Net T1 to dsx1PayloadLoop
Set dsx1LoopbackConfig for Net T1 to dsx1NoLoop
Test–>Lpbk–>DLB
Test–>Lpbk–>Abort–>DLB
Set dsx1LoopbackConfig for DTE T1 to
dsx1LineLoop
Set dsx1LoopbackConfig for DTE T1 to dsx1NoLoop
Test–>Lpbk–>RLB
Test–>Lpbk–>Abort–>RLB
Set dsx1LoopbackConfig for DTE T1 to dsx1PayloadLoop
Set dsx1LoopbackConfig for DTE T1 to
dsx1NoLoop
Test–>Lpbk–>DCLB–>Prt n
Test–>Lpbk–>Abort–>DCLB–>Prt n
Set IfExtnsTestType for port n to testFullDuplexLoopBack
Set dsx1LoopbackConfig for port n to noTest
Test–>Lpbk–>DTLB–>Prt n
Test–>Lpbk–>Abort–>DTLB–>Prt n
Set IfExtnsTestType for port n to testLoopDTLB
Set dsx1LoopbackConfig for port n to noTest
Test–>Ptrns–>Send–>ORSS–>NET
Test–>Ptrns–>Abort–>Send–>NET
Set dsx1SendCode for Net T1 to
dsx1SendQRSS
Set dsx1SendCode for Net T1 to dsx1SendNoCode
Test–>Ptrns–>Send–>QRSS–>Prt n
Test–>Ptrns–>Abort–>Send–>Prt
n
Set IfExtnsTestType for port n to testSendQRS
Set IfExtnsTestType for port
n to noTest
Test–>Ptrns–>Send–>1in8
Test–>Ptrns–>Abort–>Send–>NET
Set dsx1SendCode for Net T1 to dsx1SendOtherTestPattern
Set dsx1SendCode for Net T1 to dsx1SendNoCode
Test–>Ptrns–>Send–>511–>Prt n
Test–>Ptrns–>Abort–>Send–>Prt n
Set IfExtnsTestType for port n to testSend511
Set IfExtnsTestType for port n to noTest
Table F-1. SNMP MIB to Front Panel Command Cross-Reference (2 of 3)
Front Panel Command SNMP MIB Object