background image

Warranty

The Seller warrants its products to be free from defects in
materials and workmanship under normal use for a period of
one year. Except as specifically stated herein, all express or
implied warranties whatsoever, statutory or otherwise, including
without limitation, any implied warranty of merchantability and
fitness for a particular purpose, are expressly excluded.
Because Seller does not install or connect the products and
because the products may be used in conjunction with products
not manufactured by Seller, Seller cannot guarantee the
performance of the security system. Seller obligation and
liability under this warranty is expressly limited to repairing or
replacing, at Seller's option, any product not meeting the
specifications. In no event shall the Seller be liable to the buyer
or any other person for any loss or damages whether direct or
indirect or consequential or incidental, including without
limitation, any damages for lost profits, stolen goods, or claims
by any other party caused by defective goods or otherwise
arising from the improper, incorrect or otherwise faulty
installation or use of the merchandise sold.

Summary of Contents for Spectra 1641BL
















































Reviews: