44 User’s Manual
9.0 APPENDIX A
For
Spectra 1689 LED Keypad only
Do not read the following if you have not read
these sections:
•
User Access Codes
(see section 3.4
)
•
System’s Clock
(see section 5.4)
•
Auto-Arm Time
(see section 4.9)
After entering the 3-digit section you wish to program, the
[
ARM
1]
and
[
STAY
1]
will flash. If a value is programmed, the
number corresponding to the first digit of the programmed
value will also illuminate. At this point, you can begin entering
the required data. After entering a digit, the number
corresponding to the following programmed digit will
illuminate and so forth. For example, if you wish to change
User Code 004
from 123456 to 454545, after entering section
[004]
, number
[1]
will turn on. Press the
[4]
button and
number
[2]
will turn on, then press the
[5]
button and number
[3]
will turn on...
OR
After entering the desired 3-digit section and before entering
any data, press the
[
ENTER
]
button to access the
Data Display
Mode
. The
[
ARM
1]
and
[
STAY
1]
Lights will illuminate. Once in
the
Data Display Mode,
pressing the
[
ENTER
]
button will scroll
through the digits of the current section and the
[
BYP
]
,
[
MEM
]
&
[
TRBL
]
Lights will flash. When viewing the last digit in the
section, pressing the
[
ENTER
]
button will automatically
advance to the next section. Press
[
CLEAR
]
to exit.
