14 User’s Manual
3.0 PROGRAMMING ACCESS CODES
Access Codes are personal identification numbers that allow
you to enter certain programming modes, arm or disarm your
system as well as activate or deactivate PGMs.
The
Spectra
security system supports the following:
1
System Master Code
2
Master Codes
45
User Access Codes
(including 1 Duress code)
For information on how each
Access Code
can arm or disarm
the system refer to the
System Checklist
in section 8.0.
3.1 SYSTEM MASTER CODE (Default: 123456)
The
System Master Code
can arm or disarm any partition
using any of the methods described in this section and can
create, modify or delete any
User Access Code
(see section
3.4).
3.2 MASTER CODES
Master Code 1
is permanently assigned to Partition 1 and
can be used to create, modify or delete
User Access Codes
(see section 3.4) that are assigned to Partition 1.
Master Code 2
is permanently assigned to Partition 2 (except
when partitioning is disabled,
Master Code 2
will be assigned
to Partition 1) and can be used to create, modify or delete
