![background image](http://html2.mh-extra.com/html/paradox/pcs250g/pcs250g_reference-and-installation-manual_3589682009.webp)
Overview
Page 9
Once the PCS250G’s tamper switch is closed, the panel will reset
the trouble message and a tamper restore message will be sent
to the monitoring station and to the SMS recipients. Also, upon
the closure of the PCS250G’s tamper switch there is a 30s delay
before the PCS250G sends out a “tamper close” status to the
panel.
The PCS250G GPRS Communicator Module’s tamper functionality
is supported with a compatible Paradox control panel.
•
MG/SP v4.90 and higher
•
EVO192 v2.71 or higher
•
SP4000/SP65 v5.10 or higher
•
IP150 v2.0 or higher
Specifications
The following table describes the technical specifications of the
PCS250G GPRS Communicator Module.
Power
Class 4 (2W) @ 850/900 MHz
Class 2 (1W) @ 1800/1900 MHz
Antenna Bandwidth 70 / 80 / 140 / 170 MHz
Antenna
Gain <3dBi; impedance 50 ohm
Input power >2W peak power
Power Input
12Vdc nominal
Consumption
100 mA standby, average 450mA (1.2A
peak) during GPRS transmission
Operating
Temperature
0ºC to 50ºC (32ºF to 122ºF)
Encryption
128-bit (MD5 and RC4) or 256-bit (AES)
SMS Protocol
8-bit (ISO/IEC 8859-1) or 16-bit (UCS2
ISO/IEC10646)
Humidity
5-90%
Weight
200 gr (7.05 oz)
Dimensions
17.2 x 9.8 x 4.4 cm (6.8 x 3.9 x 1.7 in.)
Certification
EN 50136 ATS 5 Class II, Certification
Body Intertek
Summary of Contents for PCS250G
Page 2: ......
Page 43: ......
Page 44: ...To learn more about the complete line of Paradox products please visit www paradox com...