![background image](http://html2.mh-extra.com/html/paradox/pcs250g/pcs250g_reference-and-installation-manual_3589682042.webp)
Warranty
For complete warranty information, please visit www.paradox.com/terms.
Your use of the Paradox product signifies your acceptance of all warranty
terms and conditions. PCS250G, Magellan, Spectra SP, EVO, and WinLoad
are trademarks or registered trademarks of Paradox Ltd. or its affiliates in
Canada, the United States and/or other countries. For the latest product
approvals, such as UL and CE, please visit www.paradox.com.
© 2013 Paradox Ltd. All rights reserved. Specifications may change without
prior notice.
Patents
One or more of the following US patents may apply: 7046142, 6215399,
6111256, 6104319, 5920259, 5886632, 5721542, 5287111, and RE39406
and other pending patents may apply. Canadian and international patents
may also apply.
Additional Considerations
Annual verification of timing of an alarm and a fault message is required.
ATS5 requirements is the arithmetic mean of all transmissions is less than
or equal to 20 seconds and 95% of all transmissions are less than or equal
to 30 seconds. Time is measured from the moment the message is
reported on a local keypad to when the monitoring station receiver
successfully receives the message. This can be accomplished by contacting
the monitoring station and sending a text message and calculating the
time from which the message appears on the local keypad and when the
monitoring station receives the same message.
As with traditional land-line reporting an acknowledgement (kiss-off )
signal is used when the IP150 or PCS250G sends a valid message to a
receiver that is typically used in a monitoring station. This
acknowledgement is generated within 5 seconds.
Discuss with your service provider the different options that are available
for monitoring; for example, the frequency of supervision.
The transmission of an alarm message may be negatively affected by a
variety of factors. These may include disruptions in 3
rd
party services like
internet access and GSM service. If after a set amount of transmission
attempt are unsuccessful local and remote messages are generated.
Standard set of commonly available hand tool are require to install
equipment; no equipment adjustments are necessary.
When configured as indicated the PCS250G surpass the ATS5 performance
criteria set out in EN 50131-1.
Summary of Contents for PCS250G
Page 2: ......
Page 43: ......
Page 44: ...To learn more about the complete line of Paradox products please visit www paradox com...