![background image](http://html2.mh-extra.com/html/paradox/pcs250g/pcs250g_reference-and-installation-manual_3589682007.webp)
Overview
Page 7
LED Feedback
The following table provides a description of the PCS250G
Communicator Module LEDs.
Communication Loss
Upon loss of communication with the panel, the PCS250G LEDs
will behave in the following manner:
1)
GPRS LED displays is off; the SIM card and signal strength
LEDs display their status for about 3 seconds.
2)
Signal strength LED remains OFF; GPRS (green) is turned
ON, followed in turn by SIM2 (orange) and SIM1 (red). When
a LED is ON, all others are off. Each LED lights for about 200
ms. This sequence is repeated two times.
3)
This cycle repeats until communication is restored.
LED
Feedback
SIM
Card 1
Solid green = SIM card 1 is installed on the GPRS14G
Quick green flashing = SIM card 1 is exchanging data
Slow green flashing = Searching the network
Flash red (once) = SIM card 1 is defective
Off = SIM card 1 is not installed, not active, or
currently not in use
SIM
Card 2
Solid green = SIM card 2 is installed on the GPRS14G
Quick green flashing = SIM card 2 is exchanging data
Slow green flashing = Searching the network
Flash red (once) = SIM card 2 is defective
Off = SIM card 2 is not installed, not active, or
currently not in use
GPRS
Solid green = unit is set for GPRS operation
Quick green flashing = exchanging data
GSM
Option not available on the PCS250G.
Signal
Strength
LED 1, 2, and 3 (bottom three LEDs) indicate the
strength of the incoming antenna signal.
Summary of Contents for PCS250G
Page 2: ......
Page 43: ......
Page 44: ...To learn more about the complete line of Paradox products please visit www paradox com...