Page 30
Module Supervision
End User SMS Programming
With Master Programming, you can:
•
Set which phone numbers (up to 8 with MG/SP/ E-Series or
16 with Digiplex EVO) will receive text messages sent by the
PCS250 to report system events.
•
Select from which area the PCS250 will send text messages
(per phone number).
•
Select which event groups (alarm, arm/disarm, trouble and
trouble restore) will generate text messages.
End User SMS Programming with Digiplex EVO
1)
Enter the control panel [
MASTER
CODE
] then press [0] to
access Master Programming.
2)
Press [1] to enter the SMS settings menu.
3)
Select which phone number you wish to program ([01] to
[16]).
4)
Enter or modify the phone number - up to 32 characters. To
go to the next screen press [
ENTER
].
5)
Select which partitions are enabled for that SMS number by
enabling options [1] to [8]. Press [
ENTER
] to go to the next
screen.
6)
To select which events generate an SMS message, enable or
disable options [1] to [4].
7)
To save press [
ENTER
].
8)
After saving or in the main SMS settings menu press [
] to
see which SMS numbers ([01] to [16]) are programmed. To
program the SMS number currently displayed, press [
ACC
].
End User SMS Programming with MG/SP / E-Series
1)
To access Master Programming, press the
[
]
key.
2) Enter
[
MASTER
CODE
]
.
3) To enter SMS Setup, press
[
ARM
]
.
4) Using
the
[
] and [
]* or [
STAY
] keys, select one of the
eight telephone numbers you wish to program and press
[
ENTER
]
.
*With K10LEDV/H or K636 keypads, use [
SLEEP
] for [
] and
[
STAY
] for [
].
5)
Enter or modify the phone number - up to 32 characters. To
go to the next screen press [
ENTER
].
6)
Select the SMS Event Call Options you wish to apply to the
telephone number.
7) To
save
press
[
ENTER
]
.
8)
Select which areas are assigned to this telephone number.
To save, press [
ENTER
].
