Paradox Esprit E55, Programming Manual

Page: 24 / 48

22 Programming Guide
44 = New trouble
(Partition 1 only except sub-group 07 = both partitions) 00 = N/A
01 = AC failure
02 = Battery failure
03 = Auxiliary current overload
04 = Bell current overload
05 = Bell disconnected
06 = Clock loss
07 = Fire loop trouble
08 = Fail to communicate to monitoring station telephone #1
09 = Fail to communicate to monitoring station telephone #2
10 = Fail to communicate to pager report
11 = Fail to communicate to voice report
13 = GSM RF jamming
14 = GSM no service
15 = GSM supervision lost
16 = Fail To Communicate IP Receiver 1 (GPRS) (E65 panels only)
17 = Fail To Communicate IP Receiver 2 (GPRS) (E65 panels only)
18 = IP Module No Service (E65 panels only)
19 = IP Module Supervision Loss (E65 panels only)
20 = Fail To Communicate IP Receiver 1 (IP) (E65 panels only)
21 = Fail To Communicate IP Receiver 2 (IP) (E65 panels only)
99 = Any new trouble event
45 = Trouble restored 00 = Telephone line restored
01 = AC failure restore
02 = Battery failure restore
03 = Auxiliary current overload restore
04 = Bell current overload restore
05 = Bell disconnected restore
06 = Clock loss restore
07 = Fire loop trouble restore
08 = FTC central 1 restored
09 = FTC central 2 restored
10 = FTC pager restored
11 = FTC voice restored
13 = GSM jamming restored
14 = GSM no service restore
15 = GSM supervision lost restore
16 = Fail To Communicate restore IP Receiver 1 (GPRS) (E65 only)
17 = Fail To Communicate restore IP Receiver 2 (GPRS) (E65 only)
18 = IP Module No Service restore (E65 panels only)
19 = IP Module Supervision loss restore (E65 only)
20 = Fail To Communicate restore IP Receiver 1 (IP) (E65 only)
21 = Fail To Communicate restore IP Receiver 2 (IP) (E65 only)
99 = Any trouble restored event
46 = Bus / EBus module new trouble
(Partition 1 only) 00 = Bus / EBus module communication fault
01 = Tamper trouble
02 = Power fail
03 = Battery failure
99 = Any bus module new trouble event
47 = Bus / EBus module trouble restored
(Partition 1 only) 00 = Bus / EBus module communication fault restore
01 = Tamper trouble restore
02 = Power fail
03 = Battery failure
99 = Any bus module trouble restored event
48 = Special (Partition 1 only) 00 = System power up
01 = Reporting test
02 = Software log on
03 = Software log off
04 = Installer in programming mode
05 = Installer exited programming mode
06 = Maintenance in programming mode
07 = Maintenance exited programming mode
08 = Closing delinquency delay elapsed
99 = Any special event
Event Group # Sub-group #