Paradox Esprit E55, Programming Manual

Page: 12 / 48

10 Programming Guide
Keypad Programming
Keypad Zone Number Assignment
Entry Point Zone Assignment (StayD)
Keypad Input/Output Configuration (K636 V2.0 and higher)
NOTE: When configuring as an output, you must first clear the keypad zone (if assigned).
Step Action Details
1 [
ENTER
] + [
INSTALLER CODE
]
(default: 0000 / 000000)
[
ARM
] + [
STAY
] = flash. [
MAINTENANCE CODE
] may also be used.
2
Press and hold (3sec)
[
ARM
] + [
STAY
] = on
3 [
ZONE NUMBER
] + [
ENTER
] * K32LED / K32I = 2 digits: 01 to 32
K10V/H / K636 = 1 digit: 1 to 0(10) (can only assign zones 1-10)
* To erase a keypad zone number, press
[
CLEAR
] , then [
ENTER
] .
Step Action Details
1 [
ENTER
] + [
INSTALLER CODE
]
(default: 0000 / 000000)
[
ARM
] + [
STAY
] = flash.
2 Press and hold [
OFF
] (3sec) [
ARM
] + [
STAY
] = on
3 [
ZONE NUMBER
] * K32LED / K32I = 2 digits: 01 to 32
K10V/H / K636 = 1 digit: 1 to 0(10) (can only assign zones 1-10)
* The first zone you program will be the designated entry point and will flash. Up to three
more path zones can be added; these zones will light up and stay lit.
4 [
ENTER
] Press [
ENTER
] to save and exit
Step Action Details
1 [
ENTER
] + [
INSTALLER CODE
]
(default: 0000 / 000000)
[
ARM
] + [
STAY
] = flash.
2 Press and hold [
ARM
] (3sec) [
ARM
] + [
STAY
] = on
3 Option [1] ON = Output switches to ground following system arming (Blue wire 150mA max.).
OFF = Input (Keypad zone input)
4 Option [2] ON = Output N.C.
OFF = Output N.O.
[701] Keypad Options
Option OFF ON
[3]
Confidential mode
N
Disabled
N
Enabled
[4]
To exit confidential mode
N
Enter a code
N
Press a key
[5]
Confidential mode timer
N
2 minutes
N
5 seconds
[703] Keypad Options
Option OFF ON
[1]
One-touch regular arming
N
Disabled
N
Enabled
[2]
One-touch stay arming
N
Disabled
N
Enabled
[3]
One-touch sleep arming
N
Disabled
N
Enabled
[4]
One-touch bypass programming
N
Disabled
N
Enabled