background image

Look for 

and

marks on products. Only products bearing

those marks are UL and ULC listed.

Paradox Security Systems  - Graphic Dept. - PRINTED IN CANADA

WARRANTY 

Warranty conditions for the Esprit 727 may vary from country

to country. Please consult your local dealer for complete war-

ranty information. In all cases, the warranty does not cover

malfunctions arising from installer error or failure to follow

installation/operation instructions, nor does it apply to dam-

ages due to causes beyond the control of Paradox Security

Systems, such as lightning, excessive voltage, mechanical

shock or water damage.

LIABILITY

Under no circumstances shall Paradox Security Systems. be

held liable for any direct or indirect damages, loss of antici-

pated profits, loss of time or any other losses incurred by the

buyer in connection with the purchase, installation, operation

or failure of this product.

WARNING

This security system should undergo frequent testing.

However, despite regular testing, and due to, but not limited

to, criminal tampering or electrical disruption, it is possible for

this product to fail to perform as expected.

UM727

UM727

Summary of Contents for Esprit 727










Reviews: