Digiplex 848/DigiplexNE LED Keypads 21
n
How do I program a user access code?
1) Enter your
[System Master Code]
or
[Access Code]
with
Master feature.
2) Press the
[0]
key to enter the User Programming Menu. The area
lights of areas assigned to your User Access Code and the
P
RG
action light will flash.
3) Press the
[Acc]
key. The area lights of the areas assigned to
your User Access Code and the
A
CCESS
action light will
illuminate. The
P
RG
action light will continue to flash.
4) Enter either a 2-digit User Number (02 to 96 for a Digiplex 848
system) or a 3-digit number (002 to 999 for a DigiplexNE system)
you wish to program. The
A
CCESS
action light will flash for an
unused code. If the code is used,
P
RG
action light and the first
number of the code will illuminate. The
A
CCESS
action and area
light will turn off.
5) Enter a User Code. If you do not want to change an existing one,
press the
[
U
]
key until you reach User Options. Your keypad will
emit a Half Beep when it switches to User Options. Pre-existing
options will illuminate.
6) Program the User Options (Table 1 on page 22) by turning the
options “ON” or “OFF”. Once the options are programmed, press
the
[
U
]
key to reach the Area Assignment. Your keypad will emit
a Half Beep when it switches to Area Assignment. Pre-existing
assignments will illuminate.
7) Program the Area Assignment (Table 2 on page 25). Press the
[
V
]
key to return to User Options or press
[Enter]
to save and
exit. Your keypad will emit a Confirmation Beep to confirm the
code’s acceptance.
Summary of Contents for Digiplex DGP2-648
Page 1: ...48 Zone LED Keypad User Manual DGP2 648...
Page 2: ......
Page 37: ...Digiplex 848 DigiplexNE LED Keypads 35n Figure 2 Delayed Fire Zone...
Page 43: ......
