Digiplex 848/DigiplexNE LED Keypads 17
n
6.0 DISARMING
When the system is disarmed, the system deactivates the zones so
the alarm will not be triggered if zones are breached. Any user can
disarm the system unless their code has been assigned the Arm
Only option.
24hr. zones/Fire Zones are always active (enabled),
therefore will always generate an alarm if triggered.
6.1 E
NTRY
D
ELAY
T
IMER
Based on your instructions the installer will program designated entry
points, such as the front door or the garage door, with an entry delay.
This delay will allow you enough time to enter your code to disarm
the system before the alarm is triggered.
6.2 D
ISARMING
AN
A
RMED
S
YSTEM
You will only be able to disarm the area to which your User Access
Code is assigned. User Access Codes with the Arm Only option will
not be able to disarm the system.
Use One-Touch keys (see section 5.6) or a keyswitch (see
section 5.7) to disarm the area.
How do I disarm the system?
1) Enter your
[
ACCESS
CODE
]
.
2) Press the
[Disarm]
button. If you have access to more than one
area, select the area(s) you wish to disarm.
Summary of Contents for Digiplex DGP2-648
Page 1: ...48 Zone LED Keypad User Manual DGP2 648...
Page 2: ......
Page 37: ...Digiplex 848 DigiplexNE LED Keypads 35n Figure 2 Delayed Fire Zone...
Page 43: ......
