Digiplex 848/DigiplexNE LED Keypads 11
n
5.5 F
ORCE
A
RMING
Force Arming allows you to arm your system when specific zones are
open. Your installer can program certain zones to remain unarmed
when you initiate Force Arming. Once the open zone is closed,
however, the system will then arm it as well. Only User Access
Codes with the Force Arm option enabled can Force Arm the system.
This feature is commonly used when a motion detector is protecting
an area occupied by a keypad. During Force Arming, the motion
detector will remain unarmed (will be ignored) until you exit the area
that it protects. The system will then arm the motion detector.
How do I Instant Arm?
1) Enter your
[Access Code]
. Your keypad will emit a Confirmation
Beep. The
A
CCESS
action light will flash.
2) Press the
[5]
key.
If you have access to more than one area, press the number key
representing the area you want to Instant Arm or the
[0]
key for all
assigned areas. After the Confirmation Beep, the Exit Delay Timer
will begin the countdown to arming.
How do I Force Arm?
1) Enter your [
ACCESS
CODE
].
2) Press the
[Force]
key.
If you have access to more than one area, press the area’s
number, press the [0] button for all areas. The
Force
LED
and the selected area LED will illuminate.
Summary of Contents for Digiplex DGP2-648
Page 1: ...48 Zone LED Keypad User Manual DGP2 648...
Page 2: ......
Page 37: ...Digiplex 848 DigiplexNE LED Keypads 35n Figure 2 Delayed Fire Zone...
Page 43: ......
