14 User’s Manual
If you have access to more than one area, the symbol(s)
corresponding to the area(s) for which you have access will
illuminate in sequence. Press the number key representing
the area you want to arm. To view the time set, instead of
entering the time in Step 4, the first number of the time you
set will illuminate. Press the
[
U
]
key to illuminate the
numbers one at a time (numerical light 10
represents zero).
5.8.2 N
O
M
OVEMENT
A
UTO
-A
RMING
Your system can send a report to the security company and/or arm
the system if there is no activity in the area during a specified period
of time. Speak to your installer about this feature.
5.9 B
YPASS
P
ROGRAMMING
The installer can program certain zones with the bypass option. This
will enable you to program the system to bypass certain zones when
you arm the protected area. When a zone is bypassed, it will be
ignored the next time you arm the system. If for example, you are
renovating part of a protected area you can bypass some of its zones.
The system will keep the bypassed zone(s) in memory until the area is
armed. Once the area is disarmed, the system will unbypass the zones.
To Bypass a Zone:
• Your installer must program the selected zone(s) to have the
Bypass feature enabled.
• Program your User Access Code to include the Bypass option.
• Ensure that your User Access Code can access the zone’s
area
assignment.
Summary of Contents for Digiplex DGP2-648
Page 1: ...48 Zone LED Keypad User Manual DGP2 648...
Page 2: ......
Page 37: ...Digiplex 848 DigiplexNE LED Keypads 35n Figure 2 Delayed Fire Zone...
Page 43: ......
