12 User’s Manual
You may use the One-Touch keys (see section 5.6) or a
keyswitch (see section 5.7) to arm the area. Ask your
installer for details.
5.6 O
NE
-T
OUCH
K
EYS
Your installer can program your system to respond to certain features
with the touch of a key. You will then access these features without
using your User Access Code by pressing and holding the desired
key. To do so, press and hold the following keys.
For more information concerning these features, please refer to their
respective sections.
5.7 K
EYSWITCH
A
RMING
Your installer can add a keyswitch to arm and disarm your system.
Your installer can program the keyswitch to arm in Regular, Stay,
Force or Instant mode. In addition, the keyswitch can act as a
Maintained or Momentary keyswitch.
5.7.1 M
AINTAINED
K
EYSWITCH
To arm the system, place in the “ON” position.
To disarm the system, place in the “OFF” position.
• The
[Arm]
key to Regular Arm an area.
• The
[Disarm]
key to disarm a Stay/Instant armed area.
• The
[Stay]
key to Stay Arm an area.
• The
[Force]
key to Force Arm an area.
• The
[Byp]
key to access Bypass Programming.
• The
[5]
key to Instant Arm an area.
• The
[6]
key to modify the backlight.
Summary of Contents for Digiplex DGP2-648
Page 1: ...48 Zone LED Keypad User Manual DGP2 648...
Page 2: ......
Page 37: ...Digiplex 848 DigiplexNE LED Keypads 35n Figure 2 Delayed Fire Zone...
Page 43: ......
