Digiplex 848/DigiplexNE LED Keypads 31
n
9.3.2 S
ETTING
A
C
HIME
Z
ONE
T
IME
P
ERIOD
How do I program all the keypad’s Chimed Zones to beep only
when they open between specific hours?
1) Enter your
[Access Code]
. Your keypad will emit a Confirmation
Beep. The
A
CCESS
action light will flash.
2) Press the
[9]
key to enter the Chiming Menu. Your keypad will
emit a Confirmation Beep. The
P
RG
action light and area action
light(s) will flash.
3) Press the
[2]
key. Your keypad will emit a Confirmation Beep. The
P
RG
action light and a numerical light will illuminate. The
numerical light represents the first number of the previously set
time (numerical light 10 = zero). When the
A2
and
A3
area lights
flash, this means that no time value has been set and the default
setting (00:00 to 00:00) is unchanged.
4) Enter the time you want all chimed zones to
start
beeping when
they open according to the 24-hour clock (i.e. 9 a.m. is 09:00 and
9 p.m. is 21:00). Your keypad will emit a half beep.
5) Enter the time you want all chimed zones to
stop
beeping when
they open according to the 24-hour clock. If you want the chimed
zones to beep every time they open, enter the same time set in
Step 4. Your keypad will emit a Confirmation Beep.
6) Press the
[CLEAR]
key to exit.
Summary of Contents for Digiplex 848
Page 1: ...48 Zone LED Keypad User Manual DGP2 648 ...
Page 2: ......
Page 37: ...Digiplex 848 DigiplexNE LED Keypads 35n Figure 2 Delayed Fire Zone ...
Page 43: ......
